How to Upholster a Chair - Part 4: Sewing Double-Cord Welting

<i>Here are the other steps in this series: </i><i><a href="http://littlegreennotebook.blogspot.com/2011/06/reupholstering-chair-part-1-stripping.html" target="_blank">Part 1</a>, <a href="http://littlegreennotebook.blogspot.com/2011/06/how-to-reupholster-chair-part-2.html" target="_blank">Part 2</a>, <a href="http://littlegreennotebook.blogspot.com/2011/06/how-to-reupholster-chair-part-3.html" target="_blank">Part 3</a>, <a href="http://littlegreennotebook.blogspot.com/2011/07/how-to-reupholster-chair-part-5-sewing.html" target="_blank">Part 5</a></i><br /><br />There are lots of ways to trim out a chair. Probably the easiest thing to do is buy a ready made welting or gimp. If you get something at the store in a contrasting color it looks less lame/generic. But if you're up for it, I think a self welt is the best option. Double cord welting is awesome for DIY upholstery projects, because it covers a pretty wide area and makes sloppy stapling jobs look great.<br /><br />Making your own double cord welting is actually pretty easy. Here are the simple steps:<br /><br /><br /><div style="text-align: center;"><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8872.jpg" /></div><br /><div style="text-align: center;"></div>Lay your fabric down and fold it at a 45 degree angle. Cut an inch or two in (depending on if you are doing single or double welting) along the diagonal angle (also called the bias). Cutting fabric on the bias makes it super stretchy - perfect for hugging all the curves of the chair.<br /><br /><br /><br /><div style="text-align: center;"><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8876.jpg" /><br /><br /><br /><div style="text-align: left;">You'll need lots of piping, so cut plenty of strips.</div><br /><div style="text-align: left;"></div><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8968.jpg" /></div><br /><div style="text-align: center;"></div>I used the strips of fabric to stretch around the perimeter of chair parts to figure out generally how much cording I needed for each area (like the seat back, the chair bottom, the arms, etc.). You'll need to piece the strips together to make cording long enough for each area. Just run a stitch down two pieces, one facing up, the other down, in a upside-down V.<br /><br /><br /><br /><div style="text-align: center;"><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8942.jpg" /></div><br /><div style="text-align: center;"></div>You can buy unfinished cotton cording in all sizes at your local fabric store. It's very inexpensive - usually ten or 25 cents a yard. I used about 40 yards for my two chairs.<br /><br />The basic idea is very easy. Lay the cording down on your long strip of fabric, fold over the strip and sew in a straight line about a 1/4" inset. You can use a zipper foot here, but my regular walking foot was fine here.<br /><br /><br /><br /><div style="text-align: center;"><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8952.jpg" /></div><br /><div style="text-align: left;">Once that cording has been sewn in, lay down a second piece of cording and roll the whole thing over:</div><br /><div style="text-align: center;"><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8946.jpg" /></div><br /><div style="text-align: left;"></div><br /><div style="text-align: left;">Then simply stitch down the middle, between the two pieces of cord.</div><br /><div style="text-align: center;"><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8945.jpg" /></div><br /><div style="text-align: left;"></div><br /><div style="text-align: left;">When you're finished sewing, trim off the extra fabric close to the seam and you're done!</div><br /><div style="text-align: center;"><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8951.jpg" /></div><br /><div style="text-align: left;">I used only Magna-tac to attach my welting to the chair frame. Like I mentioned earlier, the glue dries very fast and the hold is very sturdy. I worked in about 10" lengths. I'd apply the glue directly to the cording, wait for just a few seconds for the drying process to get going, then then I pushed the cording down hard into the staples and gaps in the fabric.</div><br /><div style="text-align: center;"><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8992.jpg" /><br /><br /></div><br /><div style="text-align: left;">While the glues dries very fast, it's a good idea to keep coming back to push in the welting into place while you're working on the rest of the chair. By the time you finish, everything will be securely glued and sitting where it's supposed to!</div><br /><div style="text-align: left;"></div><br /><div style="text-align: center;"><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8991.jpg" /><br /><br /></div><br /><div style="text-align: left;">It helps to really get in the grooves if you sort of pinch the cording together, almost in half.</div><br /><div style="text-align: left;"></div><br /><div style="text-align: center;"><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8994.jpg" /></div><br /><div style="text-align: left;"></div><br /><div style="text-align: left;">The bias cut welting really does well with corners. It's super easy to apply with all the stretch and give! If you don't have enough fabric to make bias-cut piping, you can definitely make piping with strips of fabric cut on a straight edge, there will just be more wrinkles and it will be tricky to get your corners completely covered.</div><br /><div style="text-align: center;"><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8995.jpg" /><br /><br /></div><br /><div style="text-align: left;">There are a couple ways to stop your welting. Probably the cleanest looking method is to roll under the edges, but my piping was too thick, so I just cut the start and stop pieces on an angle. I cut the stop piece a little long. This helped for squishing the cording together and covering up the white parts. I also glued the inside/cut edge of the cording.</div><br /><div style="text-align: left;"></div><br /><div style="text-align: center;"><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8996.jpg" /></div><br /><div style="text-align: left;"></div><br /><div style="text-align: left;">Not completely noticeable, right?</div><br /><div style="text-align: center;"><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8998.jpg" /></div><br /><div style="text-align: left;"></div><br /><div style="text-align: left;">I love how upholstery projects absolutely come to life when the trim is added! Home stretch!</div><br /><div style="text-align: center;"><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_9009.jpg" /><br /><br /></div><br /><div style="text-align: left;">Last step is up next - sewing the cushion! <span style="font-style: italic;">Hint: if you can sew a pillow, you can make a cushion slip cover.</span></div><br /><div style="text-align: left;"><em></em></div><br /><div style="text-align: center;"><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_9003.jpg" /></div>

How to Upholster a Chair - Part 4: Sewing Double-Cord Welting

Here are the other steps in this series:  Part 1 ,  Part 2 ,  Part 3 ,  Part 5 There are lots of ways to trim out a chair. Probably the easi...

Read more »

How to Reupholster a Chair, Part 3: Stapling

<i>Here are the other parts of this series: </i><i><a href="http://littlegreennotebook.blogspot.com/2011/06/reupholstering-chair-part-1-stripping.html" target="_blank">Part 1</a>, <a href="http://littlegreennotebook.blogspot.com/2011/06/how-to-reupholster-chair-part-2.html" target="_blank">Part 2</a>, <a href="http://littlegreennotebook.blogspot.com/2011/06/how-to-upholster-chair-part-4-sewing.html" target="_blank">Part 4</a>, <a href="http://littlegreennotebook.blogspot.com/2011/07/how-to-reupholster-chair-part-5-sewing.html" target="_blank">Part 5</a></i><br /><br /><span style="font-style: italic;">Also, I have been getting a lot of emails this week asking for advice on how to upholster different pieces. In all sincerity, I wish I had the time to help with all of your projects, but unfortunately, there is just not enough time in the day. I hope you're able to figure out the projects on your own. Otherwise, I suggest consulting a professional or a friend with upholstery experience.</span><br /><br />Alright! So, now that the chair has been stripped of it's old fabric, cleaned and repainted, it's time to staple the new fabric on.<br /><br />I forgot to say earlier that when you're pulling apart the chair, be careful to not rip any of the old fabric. Use a sharpie to mark what pieces go where and use these as templates for cutting your new fabric.<br /><br /><div style="text-align: center;"><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8825.jpg" /><br /><br /><div style="text-align: left;">When you're cutting your new fabric, pay special attention to the pattern. Line things up both vertically and horizontally so that the pattern is perfectly centered.<br /><br /></div><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8832.jpg" /></div><br />Like I mentioned earlier, if the insides of a piece are still in good shape, I like to save the money and hassle and just reuse. I was able to reuse all of my burlap and batting here, which was great. However, I did run into a problem with the amount of staples I was using.<br /><br /><div style="text-align: center;"><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8822.jpg" /></div><br />There were so many layers of fabric to staple down to a very small lip on the frame, that I was starting to completely destroy the integrity of the wood (not good). The great news about upholstery project goof ups is they are almost always completely reversible. Put a staple in the wrong place? No problem. Pull it out and try again! The only reason upholstery should be considered a more advanced craft project, is it takes some ability to think outside the box a little. If you have some experience with diy projects and sewing, you can usually figure out solutions to the inevitable little problems that come up.<br /><br />Like I mentioned yesterday, I had hoped that buying a new electric staple gun that used smaller, rounded staples would fix my problem. But the staple gun was really weak and was more frustrating than anything. So my mom and I did some outside the box thinking and decided take some steps that would reduce the number of staple layers from four to two.<br /><br /><div style="text-align: center;"><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8827.jpg" /></div><br />We used a big zigzag stitch on my sewing machine (<a href="http://www.amazon.com/gp/product/B001I0JJU8/ref=as_li_ss_tl?ie=UTF8&tag=littgreenote-20&linkCode=as2&camp=217145&creative=399373&creativeASIN=B001I0JJU8">the best model ever made</a><img alt="" border="0" height="1" src="http://www.assoc-amazon.com/e/ir?t=&l=as2&o=1&a=B001I0JJU8&camp=217145&creative=399373" style="border: none !important; margin: 0px !important;" width="1" />) to sew together and reinforce the edges of the back fabric piece, the batting, burlap and webbing. It was so easy and worked really well.<br /><br /><div style="text-align: center;"><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8828.jpg" /></div><br />I should also note here that I added those two pieces of brown webbing. I don't know if they were necessary, but I thought it might help give a little more support on the back (and it did!!).<br /><br /><div style="text-align: center;"><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8829.jpg" /><br /><br /><div style="text-align: left;">Once the support parts of the back were all sewn together for reinforcing, we stapled that piece in place. Remember, the key to a successful reupholstery job is to reference all those photos you took of the chair in it's original state and as you were pulling it apart. Wherever possible, reconstruct the piece just as it was put together the first time. Don't reinvent the wheel here!<br /><br />If you should get anything out of this post, this is it. Here is how I approach stapling the fabric in place for the perfect smoothness and tautness. I pretty much use this method on every surface I've ever upholstered:<br /><br /><div style="text-align: center;"><img src="http://i224.photobucket.com/albums/dd246/jkomenda/LGNupholsterysteps.jpg" /></div><br />1. Put one staple in the center top of your project, hold the left side out very tightly and run a line of staples out to the edge of the top. I usually leave a one inch space between each staple at first, and then I come back and fill in the spaces with a staple. Be really thoughtful about each staple placement though. It's easy to get sloppy and just put in a ton of staples, but that just ends up tearing up the frame and the fabric.<br /><br /><div style="text-align: center;"><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8838.jpg" /><br /><div style="text-align: left;"><br />I LOVE this little tack hammer I got from <a href="http://www.csosborne.com/tools_1.html">CS Osbourne</a>. It's perfect for quickly and quietly going over the staples and getting them completely flush with the frame. A regular hammer can tear up the wood and a mallet is usually too big, so these are great. I tack in the staples after every line of stapling, just to make sure the fabric stays where I placed it the first time.<br /><br /></div><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8836.jpg" /><br /><br /><div style="text-align: left;">2. Start in the center again and hold the right side and staple moving to the right. Tack in staples.<br /><br />3. Now that the top piece has been centered and securely tacked in place, you have a great foundation. The next steps are all about pulling and getting the fabric smooth and very tight. <span style="font-weight: bold;">Pulling down</span> on the left side, I staple the left edge next, from top to bottom and then tack all those in.<br /><br />4. <span style="font-weight: bold;">Pulling down and to the right</span>, I staple down the right hand side and tack in the staples. Your fabric should be really tight at this point.<br /><br />5. The last line along the bottom is probably where you're going to need an extra set of hands. Have your helper <span style="font-weight: bold;">pull down</span> really hard and then staple in your center. Work out to the left with your helper moving and pulling down with you.</div><br /><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8845.jpg" /><br /><div style="text-align: left;"><br />6. From the center again, work out to to the right. Your helper might have to use a pair of pliers for this last part. Again, you really want a tight pull here.<br /><br /></div><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8847.jpg" /><br /><div style="text-align: left;"><br />And those are the basic steps to stapling on the back piece. It's really not that hard.<br /><br /></div><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8849.jpg" /><br /><br /><div style="text-align: left;">Once the back piece and the webbing were in place, I cut out the fabric for the front of the chair back, again using the old fabric template (don't forget to line up the pattern!!). This time though, I gave myself about an inch of extra fabric to work with.</div><br /><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8856.jpg" /><br /><br /><div style="text-align: left;">Okay, now for a little bit about upholstery adhesives. I have historically been a big fan of <a href="http://www.amazon.com/gp/product/B002OJX1GU/ref=as_li_ss_tl?ie=UTF8&tag=littgreenote-20&linkCode=as2&camp=217145&creative=399373&creativeASIN=B002OJX1GU">E-6000</a> epoxy. It works wells and has a strong hold. But I don't love how long it takes to dry (I get impatient holding and waiting) and once the first half of the metal tube is gone, I find it's really hard to squeeze out the epoxy.<br /><br />I'm sure you know I am a HUGE fan of <a href="http://www.amazon.com/gp/product/B00178MNFO/ref=as_li_ss_tl?ie=UTF8&tag=littgreenote-20&linkCode=as2&camp=217145&creative=399373&creativeASIN=B00178MNFO">Fabri-Tac</a><img alt="" border="0" height="1" src="http://www.assoc-amazon.com/e/ir?t=&l=as2&o=1&a=B00178MNFO&camp=217145&creative=399373" style="border: none !important; margin: 0px !important;" width="1" />. Recently I started using this glue (also made by Beacon Adhesives) called <a href="http://www.amazon.com/gp/product/B0012S1NVE/ref=as_li_ss_tl?ie=UTF8&tag=littgreenote-20&linkCode=as2&camp=217145&creative=399373&creativeASIN=B0012S1NVE">Magna-tac</a><img alt="" border="0" height="1" src="http://www.assoc-amazon.com/e/ir?t=&l=as2&o=1&a=B0012S1NVE&camp=217145&creative=399373" style="border: none !important; margin: 0px !important;" width="1" />. It is seriously amazing. It's similar to Fabri-tac, but even better. It bonds fabric, wood, metal - just about anything.</div><br /><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8864.jpg" /><br /><br /><div style="text-align: left;">I used it a lot in this project to sort of reinforce pieces. I ran a line around the border of the back piece to help the next layer of foam and batting to stay put while I stapled.</div><br /><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8867.jpg" /><br /><div style="text-align: left;"><br />Another favorite adhesive is <a href="http://www.amazon.com/gp/product/B0030MEJFC/ref=as_li_ss_tl?ie=UTF8&tag=littgreenote-20&linkCode=as2&camp=217145&creative=399373&creativeASIN=B0030MEJFC">Pro Stick</a> spray glue. It is cheap and good. I spray this on the webbing layer and also on the second layer of foam and batting again to help everything stay put while I got the staples in place. You really don't want things shifting around when you're trying to match a pattern exactly.<br /><br /></div><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8857.jpg" /><br /><div style="text-align: left;"><br />After the Magna-tac and the spray glue, the next layer was pretty well stuck in place before I started stapling.<br /><br /></div><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8863.jpg" /><br /><br /><div style="text-align: left;">I followed the same stapling pattern for the second layer on the chair back, starting at the top in the center.<br /><br />You can see below that I rolled under the edge of the fabric (that's why I cut it a little big). This helps to both keep the edges clean and not frayed, but it really helps to reinforce and strengthen the edges.<br /><br />So again, to recap, just roll under the edge about half an inch, center your pattern and place your first staple in the center. Continue rolling under, pulling tight and stapling and tacking in the same pattern outlined above.<br /><br /></div><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8870.jpg" /><br /><br /><div style="text-align: left;">The arms are easy. Just cut out an oval a couple inches bigger on all sides. Pay close attention to to pattern though!<br /><br /><div style="text-align: center;"><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8879.jpg" /><br /><br /><div style="text-align: left;">Follow the same stapling pattern rules above. Start at the center top and work you way around, pulling down the whole time. Get that fabric taut!<br /><br /></div><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8883.jpg" /><br /><br /><div style="text-align: left;">I was careful to run the pattern along the curve here (not straight) so that I could see the same design all along the top of the arm.<br /><br />Once the staples are tacked down, I used a small scissor to snip off the excess fabric.</div><br /><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8888.jpg" /><br /><br /><div style="text-align: left;">Next up is the bottom of the chair - the part that goes under the cushion. I draped some fabric over that part, <span style="font-weight: bold;">carefully matching up the pattern</span>, and cutting it a little longer than need, again so I could roll under the edges.<br /><br /></div><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8890.jpg" /><br /><div style="text-align: left;"><br />Follow those same stapling patterns. Top (or front in this case) center and working out to the edges, pulling tight the whole way. (see how the pattern lines up in the center here?)<br /><br /></div><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8892.jpg" /><br /><br /><div style="text-align: left;">Tack those staples in place and keep moving around and pulling tight! <span style="font-weight: bold;">Leave the corners alone </span>for now though until all the straight lines are done.</div><br /><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8895.jpg" /><br /><br /><div style="text-align: left;">Here was another one of those outside-the-box thinking moments. The seat bottom was sewn in to place (one of the reasons I didn't pull off the old fabric) and it sort of sloped down, so that if I just stapled and pulled tight there would be a space between the chair and the new fabric. I needed to connect the new fabric with the old seams. After I stapled down the front, I glued a line along the old seam and pulled the fabric down tightly into the seam area. Later I hand tacked the corners.</div><br /><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8896.jpg" /><br /><div style="text-align: left;"><br />You can see how the fabric slopes in here and now fits inside the seams.<br /><br /></div><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8897.jpg" /><br /><br /><div style="text-align: left;">The legs seem like they would be sort of scary, but they are easy too. Just cut out a notch in the fabric, but again, just leave enough extra fabric to roll in the edges. No need to staple the fabric around the inside of the actual leg. Just do the bottom row like normal.<br /><br /><div style="text-align: center;"><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8905.jpg" /></div><br />The rolled in edges will look clean and by pulling tight down on the bottom, there will be no lifting around the leg area. If you want to extra support you can run a line of magna-tac around the leg. And don't worry too much about exactness here. The welting will help cover up the gaps.</div><br /><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8902.jpg" /><br /><br /><div style="text-align: left;">Once all the straight lines around the bottom have been stapled and tacked down, it's time to do the corners. Again, reference the photos you took before. Here's what the old corners looked like:</div><br /><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8898.jpg" /><br /><br /><div style="text-align: left;">For a corner like this, just pull down the middle and put one staple in.</div><br /><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8907.jpg" /><br /><div style="text-align: left;"><br />Then just like wrapping a present. fold in both corners and staple in again.<br /><br /></div><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8910.jpg" /><br /><div style="text-align: left;"><br />I finished up the front first because I had to glue down the other seam parts. Then I worked my way around to the sides and the back, cutting around the legs, rolling in, pulling tight, stapling and tacking.<br /><br /></div><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8915.jpg" /><br /><br /><div style="text-align: left;">And then the stapling part was done!</div><br /><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8917.jpg" /><br /><div style="text-align: left;"><br />It's really not as hard as it feels. It's one of those projects where you can figure it out best when you're just doing it. It will make sense as you're pulling and stapling.<br /><br /></div><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8924.jpg" /><br /><div style="text-align: left;"><br />Next steps: how to make piping and apply it to the chair and how to make the cushion!<br /><br /></div><img src="http://i224.photobucket.com/albums/dd246/jkomenda/IMG_8918.jpg" /></div></div><br /></div></div></div>

How to Reupholster a Chair, Part 3: Stapling

Here are the other parts of this series:  Part 1 ,  Part 2 ,  Part 4 ,  Part 5 Also, I have been getting a lot of emails this week asking fo...

Read more »